Network Placement and Network Security Groups

Everpure Cloud Azure Native

Audience
Public
Source Type
Documentation

The Platform Console management interfaces are placed in the same subnet as the iSCSI data path interfaces. This subnet is not configurable: attempting to specify a different subnet, or more than one subnet, is rejected with a validation error.

Because the management path and the data path share a subnet, separation between them is achieved with Network Security Groups rather than with subnet boundaries. Everpure recommends that customers apply Network Security Group rules as the primary control for the Platform Console, for the following reasons:

  • the management endpoint and the storage data path are not separated by subnet, so a Network Security Group is the only place where administrative access can be scoped independently of application traffic

  • storage administration traffic usually originates from a small number of jump hosts or administrative subnets, while iSCSI traffic originates from application virtual machines, so the two have very different legitimate source ranges

  • restricting inbound management traffic to known administrative sources limits exposure of the console without affecting application access to volumes

The following table describes the ports used on the Delegated VNet in the Customer environment:

Feature Source / Destination Ports / Protocol Description / Related
Data path IPs of Host/Application VM(s) 3260 (iSCSI) Enables volumes to be mounted on Host VMs via iSCSI
Platform Console (GUI) and REST API IPs with enabled access to Platform Console management

80 (HTTP for redirect),

443 (HTTPS)

Enables management, applicable if Platform Console feature is turned on and configured to allow access to GUI
Platform Console (SSH)

IPs with enabled access to Platform Console management

22 (SSH) Enables management, applicable if Platform Console feature is turned on and configured to allow access to SSH
Important: It is strongly advised to restrict access to the Platform Console strictly to IP addresses where elevated privilege access is required (access to the Platform Console is not required for VMs to consume storage).

Any other port can be restricted via a Network Security Group (NSG) on the subnet delegated to Everpure Cloud service. Customers who choose to manage these Network Security Groups themselves should be aware that overly restrictive custom rules can make the Platform Console unreachable even when it is enabled. Disabling and later re-enabling the Platform Console changes only network reachability; on-array configuration such as local users and uploaded certificates is preserved.