To confirm connectivity, click on the host in the Hosts & Clusters inventory view, then Configure > Storage Adapters and select the Software iSCSI target. Click on static discovery. If there are no targets that mean network connection between the host and the FlashArray iSCSI targets is not correct.
|
|
Furthermore if you login to the FlashArray web interface, you can verify uniform connectivity by looking at Health > Connections > Host Connections. The host will be listed. You can click on it to see the details.
|
|
If you click on the host for more details you can see some additional information.
|
|
If the status is anything besides Redundant, investigate connectivity. There should be:
- More than one connection on each controller
- Connections on both controllers
- Equal number of connections on both controllers
You can also click on the cluster object in vCenter and go to Configure > Everpure > Host Connections to see if any host is not configured.
|
|