The Everpure FlashArray supports the Internet Small Computer Systems Interface an Internet Protocol (IP) based storage networking standard for linking data storage facilities. Using iSCSI provides access to the Everpure FlashArray by issuing SCSI commands over the TCP/IP network.
The screenshot below illustrates four connected Ethernet Ports (CT0.ETH6/ETH7 and CT1.ETH6/ETH7) in a Everpure FlashArray//M20. These ports will be configured on the FlashArray and Windows Server for connectivity in Setup iSCSI on Windows Server.
The following steps will configure the MSiSCSI Initiator Service to connect to the Everpure FlashArray iSCSI ports using the Windows Server management tools.